The EASZ-1 TF1 Watercut Monitor addresses a problem faced by piping engineers who wish to comply with standards pertaining to inlet and outlet connections e.g. the ANSI or DIN pressure ratings etc. Since sensors reside inside the process it is important not to forget that the leak paths from the sensor to the environment are also subject to the same leakage parameters as the flanged process connections.

Therefore EESIFLO International also design and manufacture the EASZ-1 TF1 so that ALL connections to the process and from the process are inline with MANDATORY piping specifications.

EESIFLO International produces instrinsically safe Zone 0 and Zone 1 watercut monitors designed to provide the highest possible sensitivity, resolution, and accuracy for water content determination in crude oil, other hydrocarbons, or other low dielectric liquids from a max of 100% to levels below 1000 parts per million (ppm). In oil and natural gas (condensate) production, watercut measurements are significantly improved with the EASZ-1 technology.

Full bore meter sizes from 1” through 42 ” and a. 4- 20 outputs are available for remote readout. Water cut, process temperature and dielectric values are measured accurately and can be reported back to a control centre.